Key points about the use of pneumatic probe:
    First, precautions

•     The nozzle of the pneumatic probe is an important part. Do not use it if there are scratches, dented or rusted.
•     It is strictly forbidden to throw, drop or hit the pneumatic probe.
•     The pneumatic probe should be coated with anti-rust oil for a long time after use.
•     After use, the nozzle of the pneumatic probe should be cleaned and the datum level should be measured.

    Second, regular spot inspection

•     Check maximum deviation

    1.In the direction of the nozzle on the side of the guide and large clearance, roll in (inside diameter; Large gauge, outside diameter; Small rules).
    2.Confirm the amount of change indicated (repeatability).
    3.Usually is1～2scale(Varies according to workpiece tolerances).

    4.The amount of wear change will become larger, in the case of wear, set the limit of the indicated change amount and clear the use limit.

    As a precision parts size pneumatic measurement equipment manufacturer, we have19+Years design experience engineer, can provide a variety of measurement solutions. The pneumatic probe produced by the use of German imported steel, to ensure the real material, after the original salt bath heat treatment, high temperature1500°Quench, wear proof, liquid nitrogen-180°Deep cooling to remove internal stress, prevent deformation, manual grinding, ensure micron accuracy.
    If you're on billion leridePneumatic probe Interested or want to know more details, please click on our online customer service for consultation, or directly call the national unified service hotline400-682-7787. We look forward to hearing from you!