The following points should be noted when maintaining the measuring head of the air momentum meter:
    1Do not touch the working surface of the probe and proofreading gage with your hand, so as not to cause rust;
    2During use, the probe should be placed in an appropriate place, such as the table of the tool cabinet or the wooden cushion plate of the stationary part of the machine tool, not on the tool holder or the guide rail of the machine tool, so as to avoid damage;
    3Regular external inspections should be carried out to see if there is any damage, rust or deformation. Once it is found that the probe and proofreading gauge begin to rust, it should be soaked in gasoline for a period of time, and then carefully wiped out, and coated with anti-rust oil;
    4Do not keep the working surface of the two proofreading gauges together, but also do not put the probe inside the proofreading gauge, otherwise the two working surfaces will be glued to each other, and the external force will be unnecessary damage when separated;
    5After the probe and proofreading gage are used, they should be wiped clean with clean cotton yarn or soft cloth, put in a special box, and then stored in the tool cabinet; If the weather is humid or can only be used after a period of time, wipe clean and then apply a layer of acid-free petroleum jelly or anti-rust oil;

    6The place where the probe and gage are kept must be dry.

    As a precision parts size pneumatic measurement equipment manufacturers, focusing on micro-precision, R & D and production of digital display pneumatic momentum meter, a variety of models, quality assurance, manufacturers direct sales, price concessions.
    If you are Digital display gas momentum meter Interested or want to know more details, please click on our online customer service for consultation, or directly call the national unified service hotline 400-682-7787. We look forward to hearing from you!