When measuring the dimensions of precision parts,Electronic gas meterThe probe is not in direct contact with the surface to be measured, avoiding the surface of the parts being scratched, and has the advantages of simple structure, self-cleaning, non-contact measurement and easy operation and maintenance, but the operator has the following in use6Points to note:

    (1The source pressure of compressed air should be maintained at0.4~0.8MPaOtherwise, the measurement accuracy will be reduced.
    (2Before compressed air enters the meter, an air source filter assembly should be equipped to clean the air source and stabilize the pressure. Air source filter components should be equipped with automatic drainage devices or manual drainage before and after work. The filter element should be replaced or cleaned regularly.
    (3The air source filter assembly shall be placed Electronic gas meterBelow the body about300~500mmTo prevent water from entering the measuring instrument body.
    (4The calibrator should be used frequently during a long period of continuous measurement or when resuming work after an interruption of measurement.
    (5After the proofreading rule is used, it should be kept properly to prevent bumping and rusting.
    (6Electronic gas meter, calibration gauge to the verification cycle should be timely sent for inspection. After verification, if the size of the calibrator changes, the actual value of the new verification should be used as the basis for adjusting the magnification of the measuring instrument.
    Focusing on micro-precision, Eleride provides measuring equipment and technical services for home appliances (compressors), automotive, aerospace (aerospace), precision machining, semiconductor manufacturing and other industries. If you are Electronic gas meterInterested or want to know more details, please click on our online customer service for consultation, or directly call the national unified service hotline 400-682-7787. We look forward to your call!