Pneumatic measuring instrument is widely used in precision machinery manufacturing industry because of its precise measurement characteristics. In addition, the pneumatic gauge with different pneumatic probe can realize the non-contact measurement of various parameters of the workpiece, reducing the damage caused by measurement errors. The probe determines the accuracy of the gas meter measurement, so what causes itGas gauge probeWhat about wear and tear? Next, let's let billion Leride explain it to you!

    1. Cause Gas gauge probe What are the causes of wear and tear?
    1The more daily use, the faster the wear;
    2, when the probe is placed adjustWhen the gauge is stored inside, the two working surfaces will be glued to each other, and will be unnecessarily damaged when separated by external force;
    3The workpiece will be attached to the honing sand particles after honing, which will make the pneumatic probe grind and accelerate the wear of the probe. On the contrary, after honing, the probe will be cleaned and then determined, the wear of the probe will be smaller, and the service cycle will be correspondingly longer.
    4When parts are measured on the machine tool, if the part is not stopped and measured directly with the probe, the debris particles on the surface of the part may rotate with the part, which may scratch the probe and cause damage.
    5If the parts and the probe are wiped before use, the measurement will affect the measurement accuracy, and may also cause the surface of the parts and the probe surface to wear, especially if the surface of some parts has an abrasive residue after grinding, the wear degree is more serious.
    Second, how to judge the probe wear?
    Want to judge The Millieride meterWhether the pneumatic probe is worn depends on whether the measured value of the probe at different positions of the workpiece is consistent with the tolerance distribution of the workpiece. That is to say, for the probe with the test hole, the airflow of the two test holes should be consistent, that is, maintain balance. When measuring any position of the workpiece, if the air flow of one pore decreases, the air flow of the other pore should be proportional to the corresponding increase. The diameter of the two test holes and the diversion groove should be the same (the balance is consistent), and the two test holes should be distributed on the center line of the probe (center symmetry). Any deviation of balance and central symmetry will cause the measurement value to jump during aerodynamic measurement, which is called the total run-out error.
    Located in the Suzhou Industrial Park of China-Singapore cooperation, Eleride focuses on micro-precision, providing cutting-edge measuring equipment and technical services for home appliances (compressors), automotive, aerospace (aerospace), precision machining, semiconductor manufacturing and other industries. If you are on the gas gauge probe or Pneumatic measuring tableInterested or want to know more details, please click on our online customer service for consultation, or directly call the national unified service hotline 400-682-7787. We look forward to your call!